236 stability control – FORD 2013 F-150 v.2 User Manual

Page 237

Advertising
background image

AdvanceTrac® with RSC® Features

Button
functions

Stability

control

OFF light

RSC®

ESC

TCS

Button pressed
and held for
more than
5 seconds at
vehicle speed
under 35 mph
(56 km/h)

Flashes then

illuminated

solid

2

Disabled

Disabled

Disabled

4

Vehicle speed
exceeds
35 mph
(56 km/h)
after button is
pressed and
held for more
than 5 seconds

Illuminated

solid

Enabled

Enabled

1

Disabled

1

Button pressed
again after
deactivation

Not

illuminated

Enabled

Enabled

Enabled

Transfer case
switched to
4WD Low
Locked

3

Illuminated

Disabled

Disabled

Disabled

4

1

Traction control system could be enabled but with higher entry

thresholds compared to full system. Electronic stability control entry
thresholds are higher compared to full system.

2

Lamp light starts blinking for three seconds after entering press and

hold state.

3

Control switch is not pressed. Stability control light turned on when

4WD low locked transfer case mode selected.

4

Engine traction control and two-wheel spin brake traction control

functions are disabled. Single wheel spin traction control is always
enabled.

236

Stability Control

2013 F-150 (f12)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)

Advertising