Checking the wiper blades, 206 maintenance – FORD 2013 Fiesta v.1 User Manual

Page 206

Advertising
background image

3. Run the engine until it reaches normal operating temperature.

4. Allow the engine to idle for at least one minute.

5. Turn the A/C on and allow the engine to idle for at least one minute.

6. Drive the vehicle to complete the relearning process.
• The vehicle may need to be driven 10 miles (16 km) or more to

relearn the idle and fuel trim strategy.

Note: If you do not allow the engine to relearn its idle trim, the idle

quality of your vehicle may be adversely affected until the idle trim is
eventually relearned.

When the battery is disconnected or a new battery installed, the
transmission must relearn its adaptive strategy. As a result of this, the
transmission may shift firmly. This operation is considered normal and
will not affect function or durability of the transmission. Over time the
adaptive learning process will fully update transmission operation to its
optimum shift feel.

If the battery has been disconnected or a new battery has been installed,
the clock and the preset radio stations must be reset once the battery is
reconnected.

Always dispose of automotive batteries in a responsible manner. Follow
your local authorized standards for disposal. Call your local authorized
recycling center to find out more about recycling automotive batteries.

CHECKING THE WIPER BLADES

Run the tip of your fingers over the edge of the blade
to check for roughness.

Clean the wiper blades with washer fluid or water
applied with a soft sponge or cloth.

206

Maintenance

2013 Fiesta (fie)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising