Replacing the battery, Integrated keyhead transmitter (ikt), Keys and remote control 57 – FORD 2013 Fiesta v.1 User Manual

Page 57

Advertising
background image

The key also contains a removable
mechanical key blade that can be
used to unlock the driver door. To
release the mechanical key blade,
press the release buttons on the
edge of the transmitter and remove
the key blade.

Note: Your vehicle’s back-up keys
were issued with a security tag that
provides important vehicle key cut
information. Keep the tag in a safe
place for future reference.

Replacing the Battery

Note: Refer to local regulations when disposing of transmitter batteries.

Note: Do not wipe off any grease on the battery terminals or on the
back surface of the circuit board.

Note: Replacing the battery will not delete the transmitter from the
vehicle. The transmitter should operate normally.

The remote control uses one coin-type three-volt lithium battery CR2032
or equivalent.

Integrated Keyhead Transmitter (IKT)

1. Carefully insert a flat object (e.g.
a screwdriver) into the recess on
the back of the key and remove the
key blade.

Keys and Remote Control

57

2013 Fiesta (fie)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising