Vertical aim adjustment, 212 maintenance – FORD 2013 Fiesta v.2 User Manual

Page 213

Advertising
background image

Vertical Aim Adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.

• (A) 8 feet (2.4 meters)
• (B) Center height of lamp to

ground

• (C) 25 feet (7.6 meters)
• (D) Horizontal reference line
2. Measure the height of the
headlamp bulb center from the
ground and mark an 8 foot
(2.4 meter) horizontal reference
line on the vertical wall or screen at

this height (a piece of masking tape works well). The center of the lamp
is marked by a 3 millimeter circle on the headlamp lens

3. Turn on the headlamps to illuminate the wall or screen and open the
hood.

To see a clearer light pattern for adjusting, you may want to block the
light from one headlamp while adjusting the other.

On the wall or screen you will
observe a flat zone of high intensity
light located at the top of the right
hand portion of the beam pattern. If
the top edge of the high intensity
light zone is not at the horizontal
reference line, the headlamp will
need to be adjusted.

C

A

B

D

212

Maintenance

2013 Fiesta (fie)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising