Wheels and tires 255 – FORD 2013 Fiesta v.2 User Manual

Page 256

Advertising
background image

WARNING: Always use the jack provided as original equipment
with your vehicle. If using a jack other than the one provided as

original equipment with your vehicle, make sure the jack capacity is
adequate for the vehicle weight, including any vehicle cargo or
modifications.

Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.

1. Park on a level surface, set the parking brake and activate the hazard
flashers.

2. Place the transmission selector lever in position P or R and turn the
engine off.

3. Remove the spare tire and jack
by turning their tie-down bolts
counterclockwise. The lug wrench is
located in a bag next to, or on top
of, the spare tire.

4. Block the diagonally opposite
wheel.

5. Loosen each wheel lug nut one-half turn counterclockwise, but do not
remove them until the wheel is raised off the ground.

6. The vehicle jacking points are
shown here, and are depicted on the
yellow warning label on the jack.

Note: Jack at the specified locations to avoid damage to the vehicle.

Wheels and Tires

255

2013 Fiesta (fie)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising