Opening and closing the moonroof, Bounce-back, Venting the moonroof – FORD 2013 Focus v.1 User Manual

Page 100: Relearning function, 100 windows and mirrors

Advertising
background image

The moonroof control is located on the
overhead console.

Opening and Closing the Moonroof

Press and release the rear of the control to open the moonroof. If the
sliding shade is closed, it will open along with the moonroof. The
moonroof will stop short of the fully opened position.

Note: This position helps to reduce rumbling wind noise which may
happen with the moonroof fully open. Press and release the control again
to fully open the moonroof.

Press and release the front of the control to close the moonroof.

Bounce-Back

The moonroof will stop automatically while closing and reverse some
distance if there is an obstacle detected while closing.

Press and hold the front of the control within two seconds of a
bounce-back event to override the function. While bounce-back is active,
the closing force increases for each of the next three time the moonroof
is closed.

Venting the Moonroof

Press and release the front of the control while the moonroof is closed.
Press and hold the rear of the control to close the moonroof.

Relearning Function

In case the moonroof does not close properly, follow this procedure:

1. Tilt the moonroof into the vent position as far as possible. Release the
switch.

2. Press and hold the same switch again for 30 seconds until you see the
moonroof move.

3. Release the switch and immediately press and hold it again. The
moonroof will close, open fully and then close again. Do not release the
switch before the moonroof has reached the closed position for the
second time.

100

Windows and Mirrors

2013 Focus (foc)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising