Replacing rear lamps - 5 door, Replacing license plate lamp assembly, Replacing high-mount brake lamp assembly – FORD 2013 Focus v.3 User Manual

Page 269: 268 maintenance

Advertising
background image

Replacing Rear Lamps - 5 Door

1. Make sure the headlamp control
is in the off position and open the
trunk.

2. Remove the trim panel from
inside the luggage compartment.

3. Remove the two nuts from the
lamp assembly

4. Gently pull the lamp assembly away from the vehicle

5. Remove the bulb by turning the bulb socket counterclockwise. Gently
pull the bulb straight out of the socket.

A. Brake lamp bulb

B. Reverse lamp bulb

C. Tail lamp and side marker lamp
bulb

D. Turn signal bulb

Install the new bulb in reverse order.

Replacing License Plate Lamp Assembly

Your vehicle is equipped with an LED license plate lamp assembly. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.

Replacing High-Mount Brake Lamp Assembly

Your vehicle is equipped with an LED center high-mount stop lamp. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.

A

C

D

B

268

Maintenance

2013 Focus (foc)
Owners Guide gf, 3rd Printing, November 2012
USA
(fus)

Advertising