Safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2013 Focus v.3 User Manual

Page 39: 38 safety belts

Advertising
background image

SAFETY BELT HEIGHT ADJUSTMENT

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety belt
and increase the risk of injury in a crash.

Adjust the height of the shoulder belt so the belt rests across the middle
of your shoulder.

To adjust the shoulder belt height:

1. Squeeze the buttons and slide the
height adjuster up or down.

2. Release the buttons and pull
down on the height adjuster to
make sure it is locked in place.

SAFETY BELT WARNING LIGHT AND INDICATOR CHIME

This lamp illuminates and an audible warning will sound if the
driver’s safety belt has not been fastened when the vehicle’s
ignition is turned on.

Conditions of Operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light illuminates
1-2 minutes and the warning chime
sounds 4-8 seconds.

The driver’s safety belt is
buckled while the indicator light
is illuminated and the warning
chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light and
indicator chime remain off.

38

Safety Belts

2013 Focus (foc)
Owners Guide gf, 3rd Printing, November 2012
USA
(fus)

Advertising