Front passenger sensing system, Seating and safety restraints 199 – FORD 2013 Focus Electric User Manual

Page 199

Advertising
background image

• a readiness light and tone
• and the electrical wiring which connects the components
• Side curtain airbag system. Refer to Side curtain airbag system later

in this chapter.

• Front passenger sensing system. Refer to Front passenger sensing

system later in this chapter.

• “Passenger airbag off” or “pass airbag off” indicator lamp. Refer to

Front passenger sensing system later in this chapter.

The diagnostic module monitors its own internal circuits and the
supplemental airbag electrical system wiring (including the impact
sensors), the system wiring, the airbag system readiness light, the airbag
backup power, the airbag ignitors and safety belt pretensioners.

FRONT PASSENGER SENSING SYSTEM

WARNING: Even with Advanced Restraints Systems, children 12
and under should be properly restrained in a rear seating

position.

WARNING: Sitting improperly out of position or with the seat
back reclined too far can take off weight from the seat cushion

and affect the decision of the front passenger sensing system, resulting
in serious injury or death in a crash.
Always sit upright against your seatback, with your feet on the floor.

WARNING: To reduce the risk of possible serious injury:
Do not stow objects in seat back map pocket (if equipped) or

hang objects off seat back if a child is in the front passenger seat.
Do not place objects underneath the front passenger seat or between
the seat and the center console (if equipped).
Check the passenger airbag off or pass airbag off indicator lamp for
proper airbag Status.
Failure to follow these instructions may interfere with the passenger
seat sensing system.

WARNING: Any alteration/modification to the front passenger seat
may affect the performance of the front passenger sensing system.

Seating and Safety Restraints

199

2013 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising