Sound, Rear view camera (if equipped), Enable valet mode – FORD 2013 Focus Electric User Manual

Page 99: Door keypad code (if equipped), Myford touch ா 99

Advertising
background image

Your system allows you to upload and view up to 32 photos.
To access, press the Settings icon > Display > Edit Wallpaper, then
follow the system prompts to upload your photographs. Only the
photograph(s) which meet the following conditions are displayed:

• Compatible file formats are as follows: .jpg, .gif, .png, .bmp

• Each file must be 1.5 MB or less.

• Recommended dimensions: 800 x 384
Sound

Press the Settings icon > Sound to access settings for:

Sound Settings

Bass

THX Deep Note Demo

*

Midrange

DSP

*

Treble

Occupancy Mode

*

Set Balance and Fade

Speed Compensated Volume

*

If equipped.

Rear View Camera (If Equipped)

This menu allows you to access settings for your rear view camera.
Press the Menu icon > Vehicle > Rear View Camera, then select from the
following settings

• Rear Camera Delay

• Visual Park Aid Alert

• Guidelines
Enable Valet Mode

Note: If you are locked out and need to reset the PIN, you can enter
3681 and the system unlocks.
Valet mode allows you to lock the system so that none of your
information on the system can be accessed until it is unlocked with the
correct PIN.
1. Press the Menu icon > Vehicle > Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system is locked until the correct PIN is
entered again.
Door Keypad Code (If Equipped)

To change the keypad code for your keyless entry keypad system:
1. Press the Menu icon > Vehicle > Door Keypad Code.
2. Enter your current factory code, then, when prompted, enter your

new code.

MyFord Touch

99

2013 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising