FORD 2013 Fusion v.1 - Manual (Page 186)

USING ADAPTIVE CRUISE
CONTROL
(IF EQUIPPED)
WARNINGS
Always pay close attention to
changing road conditions, especially
when using adaptive cruise control.
Adaptive cruise control cannot replace
attentive driving. Failing to follow any of
the warnings below or failing to pay
attention to the road may result in a
collision, serious injury or death.
Adaptive cruise control is not a
collision warning or avoidance
system.
Adaptive cruise control will not
detect stationary or slow moving
vehicles below 6 mph (10 km/h).
Adaptive cruise control will not
detect pedestrians or objects in the
roadway.
Adaptive cruise control will not
detect oncoming vehicles in the
same lane.
Do not use the adaptive cruise
control when entering or leaving a
highway, in heavy traffic or on roads
that are winding, slippery or unpaved.
Do not use in poor visibility,
specifically fog, rain, spray or snow.
Note: It is your responsibility to stay alert,
drive safely and be in control of the vehicle
at all times.
The system is designed to automatically
adjust your speed to maintain a proper
distance between you and the vehicle in
front of you in the same lane. The driver
can select from one of four GAP settings,
the controls are located on the steering
wheel.
The system is designed to automatically
adjust your speed to maintain a proper
distance between you and the vehicle in
front of you in the same lane. The driver
can select from one of four GAP settings,
the controls are located on the steering
wheel.
E144501
The controls for using your cruise control
are located on the steering wheel.
Switching the System On
Press and release ON.
E144529
The information display will
show the grey indicator light.
E82311
The current gap setting and SET will also
display.
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+. The vehicle
speed will be stored in the memory.
184
Cruise Control