FORD 2013 Taurus v.3 - Manual (Page 410)

System Settings
System Settings provide access to your Bluetooth Devices and Advanced
menu features. Use the arrow buttons to scroll through the menu options.
The Bluetooth Devices menu allows you to add, connect, delete and set a
phone as primary as well as turn your Bluetooth feature on and off.
The Advanced menu allows you to access and set prompts, languages,
defaults, perform a master reset, install an application and view system
information.
Bluetooth Devices Menu Options
This menu allows you to add, connect, delete, set a phone as primary,
and turn Bluetooth on or off.
1. Press the phone button to enter the Phone Menu.
2. Scroll until System Settings appears and press OK.
3. Scroll until Bluetooth Devices appears and select OK.
4. Scroll to select from the following options:
If you select: You can:
Add Bluetooth
Device
*
See Using SYNC with your phone earlier in this
chapter for pairing instructions.
Connect
Bluetooth
Device Connect a previously paired Bluetooth-enabled phone.
1. Press OK to select and view a list of previously
paired phones.
2. Scroll until the desired device is chosen, then press
OK to connect the phone.
Note: Only one device can be connected at a time.
When another phone is connected, the previous one
is disconnected.
Set Primary
Phone Set a previously paired phone as your primary phone.
Press OK to select and scroll to select the desired
phone. Press OK to confirm.
Note: SYNC attempts to connect with the primary
phone at every ignition cycle. When a phone is
selected as primary, it appears first in the list and is
marked with an *.
SYNC® 409
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)