FORD 2013 Taurus v.3 - Manual (Page 67)

Optional Settings
You can configure these settings while programming a MyKey or change
them while using an admin key:
• 80 mph (130 km/h) vehicle speed limit. Drivers receive visual
warnings and an audible tone when they reach 80 mph (130 km/h).
• 45, 55 or 65 mph (75, 90, or 105 km/h) vehicle speed warning. Drivers
receive visual warnings and an audible tone when they exceed the
preselected vehicle speed.
• 45% of the maximum audio system output. The audio system displays
a message when drivers attempt to exceed the volume limits.
• AdvanceTrac, 911 Assist or Do not disturb features. Program the
system to Always-on and these features, if your vehicle is equipped,
cannot be turned off when drivers use a programmed MyKey.
CREATING A MYKEY
Use the information display to create a MyKey.
1. Insert the key you want to program into the ignition. With a
push-button start (if equipped), put the Intelligent Access key in the
backup slot; see the Starting and Stopping the Engine chapter for
the backup slot location.
2. Turn the ignition on.
3. From the main menu within the information display, press OK or
the > button to navigate through the various screens. Select Settings
and then MyKey.
4. Press OK or the > button to select Create.
5. When prompted, hold the OK button until you see a message informing
you to label this key as a MyKey. The key will be restricted at your
vehicle’s next start.
After the key is successfully programmed, make sure you label it so you
can distinguish it from the admin keys.
You can also program optional settings for the key(s). Refer to
Programming/Changing Optional Settings.
66 MyKey
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)