Cruise control, Principles of operation, Using cruise control (if equipped) – FORD 2013 Transit Connect v.1 User Manual
Page 133: Switching cruise control on, Setting a speed, 132 cruise control
PRINCIPLES OF OPERATION
Cruise control lets you maintain a set speed without keeping your foot
on the accelerator pedal.
USING CRUISE CONTROL (IF EQUIPPED)
WARNING: Do not use cruise control in heavy traffic or on
roads that are winding, slippery or unpaved.
Note: Vehicle speed may vary momentarily when driving up or down a
steep hill. Apply the brakes if the vehicle speed increases above the set
speed while driving downhill.
Note: Cruise control will disengage if the vehicle speed decreases more
than 10 mph (16 km/h) below your set speed while driving uphill.
The cruise controls are located on
the steering wheel.
Switching Cruise Control On
Press and release ON.
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator pedal.
The indicator will appear in the instrument cluster.
OFF
ON
SET
RES
132
Cruise Control
2013 Transit Connect (tst)
Owners Guide gf, 1st Printing
USA (fus)