FORD 2013 Transit Connect v.1 - Manual (Page 30)

The tether strap anchors in your vehicle are in the following positions
(shown from top view):
• Four-passenger vehicle
• Five-passenger vehicle
Perform the following steps to install a child safety seat with tether
anchors:
Note: If you install a child seat with rigid LATCH attachments, and have
attached the top tether strap to the proper top tether anchor, do not
tighten the tether strap enough to lift the child seat off the vehicle seat
cushion when the child is seated in it. Keep the tether strap just snug
without lifting the front of the child seat. Keeping the child seat just
touching the vehicle seat gives the best protection in a severe crash.
Front passenger seating position
The tether can be attached directly to the rear of the front seat.
1. Route the tether strap under the head restraint and between the head
restraint posts.
Child Safety 29
2013 Transit Connect (tst)
Owners Guide gf, 1st Printing
USA (fus)