Seating and safety restraints – FORD 2012 Expedition v.2 User Manual
Page 196
Advertising
![background image](/manuals/602092/196/background.png)
Third row center seating position
1. Route the child safety seat tether strap over the back of the seat.
2. Locate the anchor webbing loop for the seating position.
• You may need to pull back the
top of the hinged panel along the
bottom of the seat back to access
the tether anchor.
3. Clip the tether strap through the
anchor loop as shown.
If the tether strap is clipped
incorrectly, the child safety seat may
not be retained properly in the
event of a collision.
4. Tighten the child safety seat
tether strap according to the
manufacturer’s instructions.
If the safety seat is not anchored
properly, the risk of a child being
injured in a collision greatly increases.
Seating and Safety Restraints
196
2012 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)
Advertising
This manual is related to the following products: