FORD 2012 Expedition v.2 - Manual (Page 67)

6. Passenger heated seat control (if equipped): Press to
activate/deactivate the passenger heated seat. See Climate controlled
seats in the Seating and Safety Restraints chapter.
7. Passenger cooled seat control (if equipped): Press to
activate/deactivate the passenger cooled seat. See Climate controlled
seats in the Seating and Safety Restraints chapter.
8. REAR: Press to enable the control located in the rear floor console (if
equipped). Press again to turn the auxiliary system off. When the REAR
button is pressed, the display will show only the rear cabin settings.
After the rear setting changes are completed on the front control, the
display will automatically show all climate settings.
9. Airflow direction control: Press to toggle through the air
distribution modes listed below. The selected mode will be shown in the
display.
: Distributes air through the instrument panel vents.
: Distributes air through the instrument panel and the floor vents.
: Distributes air through the floor vents.
: Distributes air through the windshield defroster vents, demister
vents and the floor vents.
10. Driver heated seat control (if equipped): Press to
activate/deactivate the driver heated seat. See Climate controlled seats
in the Seating and Safety Restraints chapter.
11. Driver cooled seat control (if equipped): Press to
activate/deactivate the driver cooled seat. See Climate controlled seats
in the Seating and Safety Restraints chapter.
12. F Front fan speed control: Press to manually increase or
decrease the fan speed. To return to full automatic control, press AUTO.
13. OFF: Outside air is shut out and the climate system is turned off.
14. Driver temperature control: Press to increase or decrease the
temperature on the driver side of the cabin. Sets the passenger side
temperature also when DUAL is disengaged. Note: The recommended
vehicle cabin setting is between 72°F (22°C) and 75°F (24°C).
Climate Controls
67
2012 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)