Tires, wheels and loading – FORD 2012 Expedition v.2 User Manual

Page 234

Advertising
background image

Weight-distributing Hitch – Vehicles without Air Suspension

WARNING: Do not adjust a weight-distributing hitch to any
position where the rear bumper of the vehicle is higher than it

was before attaching the trailer. Doing so will defeat the function of
the weight-distributing hitch, which may cause unpredictable handling,
and could result in serious personal injury.

When hooking-up a trailer using a weight-distributing hitch, always use
the following procedure:
1. Park the vehicle (without the trailer) on a level surface.
2. Measure the height of the top of the front wheel opening on the

fender, this is H1.

3. Attach the trailer to the vehicle without the weight distributing bars

connected.

4. Measure the height of the top of the front wheel opening on the

fender a second time, this is H2.

5. Install and adjust the tension in the weight distributing bars so that

the height of the front fender is approximately halfway between H1
and H2.

6. Check that the trailer is level. If not level, remove the trailer, adjust

the ball height accordingly, and repeat Steps 3–6.

Weight-distributing Hitch – Vehicles with Air Suspension

WARNING: Do not adjust a weight-distributing hitch to any
position where the rear bumper of the vehicle is higher than it

was before attaching the trailer. Doing so will defeat the function of
the weight-distributing hitch, which may cause unpredictable handling,
and could result in serious personal injury.

When hooking-up a trailer using a weight-distributing hitch, always use
the following procedure:
1. Turn off easy entry / kneel feature if equipped.
2. Park the vehicle, without trailer and with the ignition on, on a level

surface with all doors closed for a few minutes to ensure that the air
suspension has settled.

3. Measure the height of the top of the front wheel opening on the

fender, this is H1.

4. Attach the trailer to the vehicle; do not install the weight distributing

bars at this time.

5. With the ignition on and all doors closed, let the vehicle with trailer

sit for a few minutes to let the air suspension re-settle.

Tires, Wheels and Loading

234

2012 Expedition (exd)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: