Instrument cluster – FORD 2012 F-150 Raptor v.1 User Manual

Page 29

Advertising
background image

VEHICLE SPEED 80 MPH MAX — Displayed when a MyKey

௡ is in

use and the Admin has enabled the MyKey speed limit and the vehicle
speed is 80 mph (130 km/h). Refer to MyKey

௡ in the Locks and

Security chapter for more information.

SPEED LIMITED TO 80 MPH — Displayed when starting the vehicle
and MyKey

௡ is in use and the MyKey speed limit is on. Refer to MyKey

in the Locks and Security chapter for more information.

CHECK SPEED DRIVE SAFELY — Displayed when a MyKey

௡ is in

use and the optional setting is on and the vehicle exceeds a preselected
speed. Refer to MyKey

௡ in the Locks and Security chapter for more

information.

VEHICLE NEAR TOP SPEED — Displayed when a MyKey

௡ is in use

and the MyKey speed limit is on and the vehicle speed is approaching
80 mph (130 km/h). Refer to MyKey

௡ in the Locks and Security

chapter for more information.

TOP SPEED MYKEY SETTING — Displayed when a MyKey

௡ is in use

and the MyKey speed limit is on and the vehicle speed is 80 mph
(130 km/h). Refer to MyKey

௡ in the Locks and Security chapter for

more information.

BUCKLE UP TO UNMUTE AUDIO — Displayed when a MyKey

௡ is in

use and Belt-Minder

௡ is activated. Refer to MyKey௡ in the Locks and

Security chapter for more information.

ADVTRAC ON MYKEY SETTING — Displayed when a MyKey

௡ is in

use when trying to disable the AdvanceTrac

௡ system and the optional

setting is on. Refer to MyKey

௡ in the Locks and Security chapter for

more information.

TO STOP ALARM START VEHICLE — Displayed when the perimeter
alarm system is armed and the vehicle is entered using the key on the
driver’s side door. In order to prevent the perimeter alarm system from
triggering, the ignition must be turned to start or on before the
12 second chime expires. See Perimeter alarm system in the Locks and
security
chapter.

SECURITY SYSTEM FAULT — Displayed when the security system
has detected a fault. See your authorized dealer for service.

INTKEY COULD NOT PROGRAM — Displayed when an attempt is
made to program a fifth integrated key to the remote keyless entry
system. For more information on integrated key, refer to the Locks and
Security
chapter.

KEY COULD NOT PROGRAM — Displayed when an attempt is made
to program a spare key using two existing MyKeys. Refer to MyKey

௡ in

the Locks and Security chapter for more information.

Instrument Cluster

29

2012 F-150 (f12)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: