Locks and security – FORD 2012 F-550 v.3 User Manual

Page 134

Advertising
background image

Refer to Message center in the Instrument Cluster chapter for MyKey

system warnings displays.

Using MyKey

with remote start systems

MyKey

௡ is not compatible with non Ford-approved aftermarket remote

start systems. If you choose to install a remote start system please see
your authorized dealer for a Ford approved remote start system.

The following information MAY help customers who choose to use a non
Ford-approved remote start system. The actions proved below do not
make MyKey

௡ compatible with non Ford-approved remote start system,

but it MAY help you to retain some MyKey

௡ functions.

Vehicles equipped with traditional keys

When using a non Ford-approved remote start system, the default
settings may recognize the remote start system as an additional admin
key with its associated privileges. This makes it NOT compatible with
MyKey

௡. The following action may help you to retain some MyKey௡

functions:

1. Restart the engine when you insert a key into the ignition cylinder.

2. In addition to the key that you have already programmed as a
MyKey

௡, owners of vehicles equipped with traditional keys may want to

program the non Ford-approved remote start system as a MyKey

௡ if the

remote start fob is used by the MyKey

௡ driver.

To program a non Ford-approved remote start system as MyKey

௡, do the

following:

1. Enter the vehicle and close all doors.

2. Remote start the vehicle using a remote start fob.

3. Follow steps 1-4 in the Create a MyKey

௡ section.

Vehicles equipped with intelligent access key (push button start)
• It is not possible to program any remote start system as MyKey௡ on

vehicles equipped with an intelligent access key (push button start).
Therefore, you should treat the remote start fob as you would any
other admin key. When the vehicle is started using remote start, the
system will stall the engine when you either enter the vehicle or shift
the vehicle into gear. Prior to the engine stall, the vehicle will have
administrative privileges. When you restart the engine, the vehicle will
identify the user as an admin or MyKey

௡ drive depending on the

settings of the actual key used to start the vehicle.

Locks and Security

134

2012 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: