Locks and security – FORD 2012 F-550 v.3 User Manual
Page 137
Condition
Potential Causes
I accidentally
programmed all keys as
MyKeys
• Vehicle has a non Ford-approved remote
start system that is recognized as an admin
key. Refer to the Using MyKey
with
remote start systems section to reset all
MyKeys
as admin keys.
No MyKey
function with
(if equipped) intelligent
access key with push
button start
• An admin intelligent access key is present
at a push-and-start vehicle.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a non
Ford-approved remote start system (as an
admin key) then a MyKey
is inserted
without restarting the engine.
MyKey
programmed
total includes one
additional key
• Unknown key has been programmed to
the vehicle as a MyKey
.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer
to Using MyKey
with remote start
systems section.
Admin keys programmed
total includes one
additional key
• Unknown key has been programmed to
the vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer
to Using MyKey
with remote start
systems section.
MyKey
distance does
not accumulate
• MyKey is not being used by the
intended user.
• MyKey system has been recently
cleared.
• Vehicles has been started using a non
Ford-approved remote start system (as an
admin key) then a MyKey
is inserted
without recycling the MyKey
in ignition.
Locks and Security
137
2012 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA (fus)