Manual liftgate, Power liftgate (if equipped), Driver controls – FORD 2012 Flex v.1 User Manual

Page 113

Advertising
background image

MANUAL LIFTGATE

The liftgate area is only intended for cargo, not passengers. You can open
and close the liftgate from outside the vehicle. The liftgate cannot be
opened from the cargo area.

Note: In the event of a loss of power, the latch can be accessed and
released from the inside using the access panel on the liftgate trim.

To open the liftgate, press the
control button located in the top of
the liftgate pull cup handle to
unlatch the liftgate, then pull on the
outside handle to access the cargo
area.
• Do not open the liftgate in a

garage or other enclosed area
with a low ceiling. If the liftgate is
opened, the liftgate could be
damaged against a low ceiling.

• Do not leave the liftgate open while driving. Doing so could cause

serious damage to the liftgate and its components as well as allowing
carbon monoxide to enter the vehicle.

WARNING: Make sure that the liftgate door is closed to prevent
exhaust fumes from being drawn into the vehicle. This will also

prevent passengers and cargo from falling out. If you must drive with
the liftgate door open, keep the vents open so outside air comes into
the vehicle.

POWER LIFTGATE (IF EQUIPPED)

You can power open or close the liftgate with the following controls:
• Instrument panel control button
• Integrated keyhead transmitter button
• Outside liftgate control button
• Control button in the rear cargo area
Note: The liftgate movement direction can be reversed with a second
press of the instrument panel, or the rear cargo area control button, or a
second double press of the integrated keyhead transmitter button.

Driver Controls

113

2012 Flex (471)
Owners Guide, 1st Printing
USA
(fus)

Advertising