FORD 2012 Flex v.1 - Manual (Page 86)

Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to ensure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function Number of bulbs
Trade
number
Front park/turn lamp 2 3157NA
*Front sidemarker lamp N/A LED
Headlamp
2 9008 H13
2
D3 HID
(optional)
Tail/brake/turn signal lamp
2 3157K
N/A
*LED
(optional)
Supplemental taillamp 2 194
Rear sidemarker
2 194
N/A
*LED
(optional)
Backup lamp 2 921
License plate lamp 2 C5WL
*High-mount brake lamp N/A LED
Fog lamp 2 H11
Map lamp 2 12V6W
Dome/reading lamps 6 578
To replace all instrument panel lights - see your authorized dealer.
*To replace these lamps - see your authorized dealer.
Replacing interior bulbs
Check the operation of all bulbs frequently.
Replacing exterior bulbs
Check the operation of all the bulbs frequently.
Replacing headlamp (high beam/low beam) halogen bulbs
1. Make sure headlamp switch is in the off position, then open the hood.
Lights
86
2012 Flex (471)
Owners Guide, 1st Printing
USA (fus)