FORD 2012 Fusion v.1 - Manual (Page 101)

Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey
௡ system
status menus will include the remote start system as an additional key in
the total count. See the Check MyKey
௡ system status section.
Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys
௡, in which case, you will need to use
your remote start system to reset all MyKeys
௡ as admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey
௡ section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey
௡ • Key in the ignition is already a
MyKey
௡.
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key).
•SecuriLock௡ Passive Anti-Theft
System is disabled or in unlimited
mode
• Vehicle has been started using a
remote start system that is
programmed as MyKey
௡. Refer to
Using MyKey
௡ with remote start
systems section.
Cannot program the MyKey
௡
optional settings
• Key in the ignition is a MyKey௡
• No MyKeys௡ are programmed to the
vehicle. Refer to Create a MyKey
௡
section
• Vehicle has been started using a
remote start system that is
programmed as a MyKey
௡. Refer to
Using MyKey
௡ with remote start
systems section.
Locks and Security
101
2012 Fusion (fsn)
Owners Guide, 1st Printing
USA (fus)