Compass calibration adjustment, Center console, Driver controls – FORD 2012 Fusion v.1 User Manual

Page 78

Advertising
background image

Compass calibration adjustment

Perform compass calibration in an open area free from steel structures
and high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.

1. Start the vehicle.

2. To calibrate, press and hold the 7
and 9 radio preset buttons together
for approximately 10 seconds until
CAL appears. Release the buttons.

3. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the CAL display changes to the
direction value (N, S, E, W, etc.). It
may take up to five circles to
complete calibration.

4. The compass is now calibrated.

CENTER CONSOLE

Your vehicle may be equipped with a
variety of console features. These
include:

1. Cupholders (with ambient lighting
[if equipped]).

2. Secondary storage bin (on hinges
inside utility compartment).

3. Utility compartment with power
point, auxiliary input jack (AIJ),
USB port (if equipped), and coin
holder inside.

WARNING: Use only soft cups in the cup holder. Hard objects
can injure you in a collision.

Driver Controls

78

2012 Fusion (fsn)
Owners Guide, 1st Printing
USA
(fus)

Advertising