Replacing front fog lamp bulbs (if equipped), Lights – FORD 2012 Transit Connect User Manual

Page 60

Advertising
background image

3. Pull the bulb straight out of the
socket.

Install in reverse order.

Replacing front fog lamp bulbs (if equipped)

1. Make sure the headlamp switch is
in the off position.

2. Reach under the front fender and
remove the aeroshield. Then remove
the harness/bulb assembly from the
fog lamp by turning it
counterclockwise.

3. Disconnect the harness from the
bulb by pulling it straight out.

Install the new bulb in reverse order.

Replacing tail/brake/rear fog/backup lamps and turn signal bulbs

1. Make sure the headlamp control
is in the off position and then open
the cargo door.

2. Remove the two wing nuts and
gently pull the lamp assembly away
from the vehicle.

Lights

60

2012 Transit Connect (tst)
Owners Guide, 1st Printing
USA
(fus)

PAGE POSITION: 60

JOB: @zeta.tweddle.com/ford_pdm/ford/own2002/835536-en-tst/og

pubnum:

Advertising