Front safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2011 Crown Victoria v.1 User Manual

Page 105: Seating and safety restraints

Advertising
background image

Front safety belt height adjustment

Your vehicle has safety belt height
adjustments for the driver and front
outboard passenger. Adjust the
height of the shoulder belt so the
belt rests across the middle of your
shoulder.

To lower the shoulder belt height,
press the button and slide the
height adjuster down. To raise the
height of the shoulder belt, press
the button and slide the height
adjuster up. Pull down on the height adjuster to make sure it is locked in
place.

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a collision.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not buckled
before the ignition switch is turned to
the on position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds
4-8 seconds.

The driver’s safety belt is buckled
while the indicator light is illuminated
and the warning chime is sounding...

The safety belt warning light
and warning chime turn off.

The driver’s safety belt is buckled
before the ignition switch is turned to
the on position...

The safety belt warning light
and indicator chime remain off.

Seating and Safety Restraints

105

2011 Crown Victoria (cro)
Owners Guide, 1st Printing
USA
(fus)

Advertising