FORD 2011 Fiesta v.1 - Manual (Page 84)

Adding a Bluetooth media device which is in discoverable mode
Note: This is a speed dependent feature. Your vehicle must be moving
less than 3 mph (5 km/h) to use this feature.
Note: If your phone supports streaming Bluetooth audio and has already
been paired with SYNC
௡ as a phone, you do not have to go through the
pairing process again.
Note: Use this process when your device generates the PIN instead of
SYNC
௡.
Note: To scroll, press / .
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. When Media Player Menu is selected, press OK.
3. Scroll until System Settings is selected and press OK.
4. Scroll until Bluetooth Devices is selected and press OK.
5. Scroll until Add Bluetooth Device is selected and press OK.
6. When Find SYNC appears in your radio display, press OK.
7. After the search for active Bluetooth Devices is complete, scroll to
find the desired device. Press OK to confirm.
8. Refer to your device’s user guide for instructions on how to put your
device into discoverable mode. When your media device gives you a PIN,
enter that PIN into SYNC
௡ using voice commands (or using the 0–9
memory presets on your audio system, if equipped), when prompted.
9. When you have entered your last digit via voice, say “Enter”.
10. When the process is complete, SYNC
௡ will display Connected and the
name of the device will appear in the radio display.
You can now change SYNC
௡ sources to Bluetooth Audio and stream
music from your device.
Connecting a Bluetooth media device
To connect a previously paired Bluetooth device:
Note: To scroll, press / .
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. When Media Player Menu is selected, press OK.
3. Scroll until System Settings is selected and press OK.
4. Scroll until Bluetooth Devices is selected and press OK.
Entertainment Systems
84
2011 Fiesta (fie)
Owners Guide, 1st Printing
USA (fus)