Fuses and relays, Fuses, Roadside emergencies – FORD 2011 Focus v.2 User Manual

Page 192

Advertising
background image

This switch is located in the front
passenger’s footwell, behind the kick
panel access cover.

To reset the switch:

1. Turn the ignition off.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset the
switch by pressing in on the reset
button.

4. Turn the ignition to the on position.

5. Wait a few seconds and return the key to off.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.

Note: Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.

15

Roadside Emergencies

192

2011 Focus (foc)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: