FORD 2011 Focus v.2 - Manual (Page 62)

Using speed control
The speed controls are located on the steering wheel. The following
buttons work with speed control:
RESUME: Press to resume a set
speed.
SET +: Press to set a speed or
increase a set speed.
SET –: Press to decrease a set
speed.
OFF: Press to turn speed control
off.
ON: Press to turn speed control on.
Setting speed control
To set speed control:
1. Press and release ON.
2. Accelerate to the desired speed.
3. Press and release SET +.
4. Take your foot off the accelerator pedal.
5. The indicator light on the instrument cluster will turn on.
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control, press the brake pedal or press the clutch
pedal (if equipped). Disengaging the speed control will not erase
previous set speed.
Note: When you use the clutch pedal to disengage the speed control,
the engine speed may briefly increase; this is normal.
Resuming a set speed
Press and release RESUME. This will automatically return the vehicle to
the previously set speed.
RESUME
SET +
SET -
OFF ON
Driver Controls
62
2011 Focus (foc)
Owners Guide, 2nd Printing
USA (fus)