Replacing tail lamp/backup lamp bulbs, Lights – FORD 2011 Ranger v.2 User Manual
Page 46
Advertising
4. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
5. Carefully pull bulb straight out of
socket and push in the new bulb.
6. Install the bulb socket in lamp
assembly by turning clockwise.
Install the new bulb in reverse
order.
Replacing tail lamp/backup lamp bulbs
1. Make sure the headlamp switch is
in the off position, then open the
tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
Lights
46
2011 Ranger (ran)
Owners Guide, 2nd Printing
USA (fus)
Advertising
This manual is related to the following products: