Replacing license plate lamp bulbs, Lights – FORD 2011 Ranger v.2 User Manual
Page 48
Advertising
Replacing license plate lamp bulbs
1. Make sure the headlamp switch is
in the off position and reach behind
the rear bumper to locate the bulb
socket.
2. Twist the socket counterclockwise
and remove.
3. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
Lights
48
2011 Ranger (ran)
Owners Guide, 2nd Printing
USA (fus)
Advertising
This manual is related to the following products: