Two step door unlocking, One step door unlocking, Locks and security – FORD 2010 Escape Hybrid v.1 User Manual

Page 101

Advertising
background image

The IKT allows you to:
• remotely unlock the vehicle

doors.

• remotely lock all the vehicle

doors.

• remotely open the power liftgate

glass.

• activate the personal alarm.
• operate the illuminated entry

feature.

The remote entry lock/unlock
feature operates in any ignition
position except while the key is held
in the start position. The panic
feature operates with the key in the off position.

If there are problems with the remote entry system, make sure to take
ALL Integrated Keyhead Transmitters with you to the authorized
dealer in order to aid in troubleshooting the problem.

Two step door unlocking

1. Press

and release to unlock the driver’s door. Note: The interior

lamps will illuminate if the lamp is in the DOOR position.

2. Press

and release again within three seconds to unlock the

passenger doors, the liftgate and liftgate glass.

The battery saver feature will turn off the interior lamps 10 minutes after
the ignition is turned to the off position.

One step door unlocking

If the one step door unlocking feature is activated, press

and release

once to unlock all of the doors, the liftgate and liftgate glass. Note: The
interior lamps will illuminate (refer to Illuminated entry information
later in this section), if the control on the overhead lamp is in the DOOR
position.

Locks and Security

101

2010 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA
(fus)

Advertising