FORD 2010 Escape Hybrid v.1 - Manual (Page 113)

Note: For all vehicles with remote start installed, it is possible to
program all ’real’ keys as MyKeys™, in which case, you will need to use
your remote start system to reset all MyKeys™ as Admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow steps 1-4 in the Disable MyKey™ section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey™
• Key in the ignition is already a MyKey™
• Key in the ignition is the last remaining
Admin key (there always has to be at least
one Admin key)
• SecuriLock௡ Passive Anti-Theft System is
disabled or in unlimited mode
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to MyKey™ with Remote Start
Systems section.
Cannot program the
MyKey™ optional
settings
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™ section
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to MyKey™ with Remote Start
Systems section.
Cannot disable MyKey™
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™ section
• Vehicle has been started using a remote
start system that is programmed as MyKey™.
Refer to MyKey™ with Remote Start
Systems section.
Lost the only Admin key
• Purchase a new key from your authorized
dealer
Locks and Security
113
2010 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)