FORD 2010 Expedition v.1 - Manual (Page 349)

2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
3. Remove the jumper cable from the positive (+) terminal of the booster
vehicle’s battery.
4. Remove the jumper cable from the positive (+) terminal of the
disabled vehicle’s battery.
After the disabled vehicle has been started and the jumper cables
removed, allow it to idle for several minutes so the engine computer can
relearn its idle conditions.
+ –
+ –
+ –
+ –
+ –
+ –
Roadside Emergencies
349
2010 Expedition (exd)
Owners Guide (own2002), 1st Printing
USA (fus)