FORD 2010 F-150 v.1 - Manual (Page 61)

• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been “aired out.”
• If you are driving during extreme high ambient temperatures and
idling for extended periods of time in gear, it is recommended to run
the A/C in the MAX A/C position, adjust the blower fan speed to the
lowest setting and put the vehicle’s transmission into the P (Park)
position to continue to receive cool air from your A/C system.
• For maximum cooling performance (Max A/C):
Max A/C mode:
• Move the temperature control to the coolest setting.
• Set the fan to the highest speed initially, then adjust to maintain
comfort.
Panel ( ) and panel/floor ( ) modes:
• Move the temperature control to the coolest setting.
• Select A/C and recirculated air (
). Use recirculated air with A/C
to provide colder airflow.
• Set the fan to the highest speed initially, then adjust to maintain
comfort.
• To aid in side window defogging/demisting in cold weather:
1. Select
.
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents towards the side windows.
To increase airflow to the outer instrument panel vents, close the vents
located in the middle of the instrument panel.
Climate Controls
61
2010 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)