Units (english/metric), Autolamp delay (if equipped), Autolock – FORD 2010 Fusion v.1 User Manual

Page 23: Instrument cluster

Advertising
background image

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
RESET control switch to change the Oil Life Start Value. Each release
and press will reduce the value by 10%.

Note: Oil life start value of 100% equals 7,500 miles (12,000 km) or
12 months. For example, setting oil life start value to 60% sets the oil
life start value to 4,500 miles (7,200 km) and 219 days.

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press RESET to change from
English to Metric.

Autolamp delay (if equipped)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

1. To disable/enable the autolamp
delay feature, select this function
from the SETUP control for the
current display mode.

2. Press RESET to select the new
autolamp delay values of 0, 10, 20,
30, 60, 90, 120 or 180 seconds.

Autolock

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

1. To disable/enable the autolock
feature, select this function from the
SETUP control for the current
display mode.

2. Press RESET to turn autolock on
or off.

2010 Fusion (fsn)
Owners Guide, 1st Printing
USA
(fus)

Instrument Cluster

23

Advertising