FORD 2010 Fusion v.1 - Manual (Page 311)

BRAKE/CLUTCH FLUID
Brake and clutch systems are supplied from the same reservoir.
• 2.5L engine
• 3.0L and 3.5L engines
The fluid level will drop slowly as the brakes wear, and will rise when the
brake components are replaced. Fluid levels between the “MIN” and
“MAX” lines are within the normal operating range; there is no need to
add fluid. If the fluid levels are outside of the normal operating range the
performance of the system could be compromised; seek service from
your authorized dealer immediately.
TRANSMISSION FLUID
Checking 6–speed automatic transmission fluid (AWS21)
(if equipped)
Refer to your scheduled maintenance information for scheduled
intervals for fluid checks and changes. Your transmission does not
consume fluid. However, the fluid level should be checked if the
transmission is not working properly, i.e., if the transmission slips or
shifts slowly or if you notice some sign of fluid leakage.
MAX
MIN
2010 Fusion (fsn)
Owners Guide, 1st Printing
USA (fus)
Maintenance and Specifications
311