FORD 2010 Fusion v.2 - Manual (Page 207)

Parking brake
To set the parking brake (1), pull
the parking brake handle up as far
as possible.
The BRAKE warning lamp will
illuminate and will remain
illuminated until the parking brake
is released.
To release, press and hold the button (2), pull the handle up slightly,
then push the handle down.
WARNING: Always set the parking brake fully and make sure
that the gearshift is securely latched in P (Park) (automatic
transmission) or in 1 (First) (manual transmission).
WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer as soon as possible.
ADVANCETRAC
ா STABILITY ENHANCEMENT SYSTEM
WARNING: Vehicle modifications involving braking system,
aftermarket roof racks, suspension, steering system, tire
construction and/or wheel/tire size may change the handling
characteristics of the vehicle and may adversely affect the performance
of the AdvanceTrac
௡ system. In addition, installing any stereo
loudspeakers may interfere with and adversely affect the AdvanceTrac
௡
system. Install any aftermarket stereo loudspeaker as far as possible
from the front center console, the tunnel, and the front seats in order
to minimize the risk of interfering with the AdvanceTrac
௡ sensors.
Reducing the effectiveness of the AdvanceTrac
௡ system could lead to
an increased risk of loss of vehicle control, vehicle rollover, personal
injury and death.
1
2
P !
BRAKE
Driving
207
2010 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)