Driving – FORD 2010 Fusion v.2 User Manual

Page 215

Advertising
background image

P (Park)

This position locks the transmission
and prevents the front wheels from
turning.

To put your vehicle in gear:
• Press the brake pedal
• Move the gearshift lever into the

desired gear

To put your vehicle in P (Park):
• Come to a complete stop
• Move the gearshift lever and

securely latch it in P (Park)

WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.

D (Drive)

The normal driving position for the best fuel economy. Transmission
operates in gears one through six.

L (Low)

This position:
• Provides increased engine braking during downhill/mountain driving.
• Provides extended shift scheduling, allowing both upshifts and

downshifts, at a higher overall RPM to provide optimum engine
braking.

• Is not intended for use under extended or normal driving conditions

and results in lower fuel economy.

Driving

215

2010 Fusion (fsn)
Owners Guide, 2nd Printing
USA
(fus)

Advertising