Multi-point inspection, Scheduled maintenance guide – FORD 2010 Fusion Hybrid v.1 User Manual

Page 308

Advertising
background image

Multi-point Inspection

In order to keep your vehicle running right, it is important that you have
the systems on your vehicle checked regularly. This can help identify any
potential issue before there are any problems. Ford Motor Company
suggests the following multi-point inspection to be performed at every
scheduled maintenance as the way to ensure your vehicle keeps running
right.

Maximum Oil Change Interval

12 months, 10,000 miles (16,000 km) or 200 hours of engine operation.

Motorcraft Premium Gold Engine Coolant change interval

6 years or 100,000 miles (160,000 km) - change Motorcraft Premium Gold Engine Coolant (whichever comes first)

After initial change - change Motorcraft Premium Gold Engine Coolant every 3 years or 50,000 miles (80,000 km).

Check every month

Check function of all interior and exterior lights

Check tires for wear and correct air pressure, including spare tire

Check windshield washer fluid level

Check engine oil level

Check every six months

Check lap/shoulder belts and seat latches for wear and function

Check parking brake for proper operation

Check safety warning lamps (brake, ABS, air bag, safety belt) for operation

Check cooling system fluid level and coolant strength

Check low voltage (underhood) battery connections and clean if necessary

Check washer spray, wiper operation and clean all wiper blades (replace as necessary)

Check and lubricate all hinges, latches and outside locks. Inspect for correct operation

Check and lubricate door rubber weatherstrips. Inspect for excessive wear

Check and clean body and door drain holes. Inspect for clogs and obstructions

2010 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA
(fus)

Scheduled Maintenance Guide

308

Advertising