FORD 2010 Fusion Hybrid v.1 - Manual (Page 66)

5. Power/ : Press to activate/deactivate the climate control
system. When the system is off, outside air is prevented from entering
the vehicle through the vents. Turn to select the desired fan speed
manually. To return to full automatic control, press AUTO.
6. : Distributes air through the instrument panel vents. To return to
full automatic control, press AUTO.
7. : Distributes air through the instrument panel vents, demister
vents, floor vents and rear seat floor vents. To return to full automatic
control, press AUTO.
8. : Distributes air through the demister vents, floor vents and rear
seat floor vents. To return to full automatic control, press AUTO.
9. PASS TEMP (passenger temperature): Press to engage/disengage
separate passenger side temperature control. Turn to increase/decrease
the temperature on the passenger side of the vehicle. The recommended
initial setting is between 72°F (22°C) and 75°F (24°C), then adjust for
comfort. The passenger side temperature setting will appear in the upper
right corner of the display.
10. Passenger heated seat control (if equipped): Press to
activate/deactivate the passenger heated seat. See Heated seats in the
Seating and Safety Restraints chapter.
11. Recirculated air: Press to activate/deactivate air recirculation
in the vehicle. Recirculated air may reduce the amount of time needed to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculated air engages
automatically when MAX A/C is selected or can be engaged manually in
any airflow mode except
(defrost). Recirculated air may turn off
automatically in all airflow modes except MAX A/C. When the ignition
switch is turned off and back on, the climate system will return to the
recirculated air mode only if the A/C button LED is illuminated and the
air distribution selection is either
(panel) or (panel/floor).
Recirculation may turn off automatically in some airflow modes to reduce
fog potential.
12. MAX A/C: Activates air conditioning and distributes recirculated,
conditioned air through the instrument panel vents to provide maximum
cooling performance. Maximum cooling performance, however, may
decrease fuel efficiency in order to fully maintain interior cabin comfort.
13. A/C: Press to activate/deactivate air conditioning. Use with
recirculated air to improve cooling performance and efficiency. Engages
automatically in MAX A/C,
(defrost) and (floor/defrost).
2010 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)
Climate Controls
66