Message center (if equipped), Instrument cluster – FORD 2010 Mustang v.1 User Manual

Page 21

Advertising
background image

Autolamp dealy (if equipped)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

1. To disable/enable the autolamp
delay feature, select this function
using RESET stem.

2. Press and hold the RESET stem
for two seconds to select the new Autolamp delay values of 0, 10, 20, 30,
60, 90, 120 or 180 seconds.

Autolock/Autounlock (if equipped)

Autolock: This feature locks your doors when the vehicle is shifted out
of park.

Autounlock: This feature
automatically unlocks all vehicle
doors when the driver’s door is
opened within 10 minutes of the
ignition being turned off.

1. To disable/enable the
autolock/autounlock feature, select
this function using RESET stem.

2. Press and hold the RESET stem
for two seconds to toggle between on or off

MESSAGE CENTER (IF EQUIPPED)

With the ignition in the on position,
the message center, located on your
instrument cluster, displays
important vehicle information
through a constant monitor of
vehicle systems.
You may select
display features on the message center for a display of status. The
system will also notify you of potential vehicle problems with a display of
system warnings followed by a long indicator chime.

Note: Refer to the SETUP menu in this section to select the Single or
Dual mode display in your message center.

2010 05+ Mustang (197)
Owners Guide, 1st Printing
USA
(fus)

Instrument Cluster

21

Advertising