Oil life, Instrument cluster – FORD 2010 Mustang v.1 User Manual

Page 23

Advertising
background image

3. ALL DOORS CLOSED

4. DRIVER DOOR

5. PASSENGER DOOR

6. TRUNK

7. SECURITY SYSTEM (if equipped)

8. BRAKE SYSTEM

9. TRAC CONTROL (if equipped)

10. FUEL LEVEL

Oil life

An oil change is required whenever indicated by the message center.
USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
[approximately 7,500 miles (12,000 km) or six months] perform the
following:

1. Press and release the SETUP
control to display “OIL LIFE =
XXX% HOLD RESET = NEW”.

2. Press and hold the RESET
control for two seconds and release.
Oil life is set to 100% and “OIL LIFE
SET TO 100%” is displayed.

3. While “OIL LIFE SET TO 100%”
is displayed, if a lower oil life start
value is desired, press and release the RESET control to reduce the start
value. Each press of the RESET control reduces the value by 10 percent.

Note: Oil life start value of 100% equals 7,500 miles (12,000 km) or six
months. For example, setting oil life start value to 60% sets the oil life
start value to 4,500 miles (7,200 km) and 108 days.

2010 05+ Mustang (197)
Owners Guide, 1st Printing
USA
(fus)

Instrument Cluster

23

Advertising