Seating and safety restraints – FORD 2009 Edge v.2 User Manual

Page 177

Advertising
background image

The tether anchors in your vehicle are located under the second row
seat gap cover marked with tether anchor symbols (shown with title).

The tether strap anchors in your
vehicle are in the following positions
(shown from top view):

WARNING: Attach the tether strap only to the appropriate
tether anchor as shown. The tether strap may not work properly

if attached somewhere other than the correct tether anchor.

WARNING: Do not use seat anchors as cargo tie downs.

Once the child safety seat has been installed, using either the safety belt,
the lower anchors of the LATCH system, or both, you can attach the top
tether strap.

1. Route the child safety seat tether strap over the back of the seat.

For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, , otherwise
route the tether strap over the top of the seatback. If the top of the
safety seat hits the adjustable head restraint, raise the head restraint to
let the child seat fit further rearward.

2. Locate the correct anchor behind
the gap cover for the selected
seating position.

2009 Edge (edg)
Owners Guide, 2nd Printing
USA
(fus)

Seating and Safety Restraints

177

Advertising