Bounce-back, Security override, Window lock – FORD 2009 Edge v.2 User Manual

Page 72: Accessory delay, Driver controls

Advertising
background image

To operate one touch up:
• Pull the switch completely up to

the second detent and release
quickly. The window will close
fully. Momentarily press the
switch to any position to stop the
window operation.

If the switch is pressed and held to
the normal open or one touch down position during a one touch up
cycle, the window will stop. If, after 1/2 second the switch is still held,
the window will perform a normal open or one touch down.
Bounce-Back
When the window is moving upward and an obstacle or a rough road
condition interferes with the window’s movement, the window will
automatically reverse direction and move down. This is known as
“bounce-back”. If the ignition is turned off (without accessory delay
being active) during bounce-back, the window will move down until the
bounce-back position is reached.
Security Override
To override a bounce-back condition, within two seconds after the
window reaches the bounce-back position, pull and hold the switch up
and the window will travel up with no bounce-back or pinch
protection.
If the switch is released before the window is fully closed,
the window will stop. For example, this can be used to overcome the
resistance of ice on the window or seals.

Window lock

The window lock feature allows only
the driver to operate the power
windows.

To lock out all the window controls
(except for the driver’s) press the
right side of the control. Press the
left side to restore the window
controls.

Accessory delay
With accessory delay, the audio system, power windows and moon roof
(if equipped) operate for up to 10 minutes after the ignition switch is
turned from the on to the off position or until either front door is
opened.

2009 Edge (edg)
Owners Guide, 2nd Printing
USA
(fus)

Driver Controls

72

Advertising