Driver controls – FORD 2009 Edge v.3 User Manual

Page 80

Advertising
background image

To open power sunshades and
panoramic Vista Roof™:
Press
and release the

control to

open the sunshade. The front and
rear sunshades open simultaneously.

Note: Vista Roof™ will only open
after power sunshades are
completely open. Power sunshades
will only close after Vista Roof™ is completely closed.

To open the panoramic Vista Roof™ press and release the

control.

The panoramic Vista Roof™ will open to the “comfort” position. Press
and release the control again to fully open. To stop the one-touch open
feature press the control again.

Note: The “comfort” position helps to alleviate rumbling wind noise
which may happen in the vehicle with the roof fully opened.

To close the panoramic Vista Roof™ and power sunshades: Pull
the

control down until the glass panel stops at the “Express close”

position. Firmly pull and hold the control again to fully close the Vista
Roof™. Pull the control down again to close the sunshades at the
“Express close” position. Firmly pull and hold the control again to fully
close the front and rear sunshades.

To vent the panoramic Vista
Roof™:
From the closed position,
press and release the TILT control.
To close, pull and hold the TILT
control down.

Note: If the panoramic Vista Roof™
is excessively operated, the glass
and shade motors will automatically
go into a fail-safe jog mode (manual intermittent operation) to prevent
overheating and/or damage to the motor. The motors will revert back to
normal operation after a period of idle time.

Driver Controls

80

2009 Edge (edg)
Owners Guide, 3rd Printing
USA
(fus)

Advertising