System check, Units (english/metric), Autolamp delay – FORD 2009 Edge v.3 User Manual

Page 90: Driver controls

Advertising
background image

• Easy entry/exit seat (if equipped)
• Power Liftgate (if equipped)
• Reverse sensing system (Park Assist) (if equipped)
• Language

System check

Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either an OK message or a warning message
for two to four seconds.

Pressing the RESET control cycles the message center through each of
the systems being monitored.

The sequence of the system check report is as follows:

1. DOORS CLOSED

2. ENGINE TEMPERATURE

3. OIL PRESSURE

4. BRAKE FLUID LEVEL

5. WASHER FLUID LEVEL

6. FUEL LEVEL

7. DISTANCE TO EMPTY

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press the RESET control to
change from English to Metric.

Autolamp delay

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Driver Controls

90

2009 Edge (edg)
Owners Guide, 3rd Printing
USA
(fus)

Advertising