System warnings/information, Driver controls – FORD 2009 Escape Hybrid v.2 User Manual

Page 82

Advertising
background image

3. Press and hold the RESET control for two seconds to set the language
choice.

System warnings/information

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for four
seconds.

The message center will display the last selected feature if there are no
more warning messages. This allows you to use the full functionality of
the message center after you acknowledge the warning by pressing the
RESET control and clearing the warning message.

Warning messages that have been reset are divided into two categories:
• They will reappear on the display ten minutes from the reset.
• They will not reappear until an ignition off/on cycle has been

completed if the fault condition still exists.

This acts as a reminder that these warning conditions still exist within
the vehicle.

Warnings

Status

Driver door ajar

Warning cannot be reset

Passenger door ajar

Rear left door ajar

Rear right door ajar

Stop safely now

Warning returns after 10 minutes if
condition still exists

High engine temperature

High motor temperature

Park brake engaged

XXX miles to E fuel level low

2009 Escape Hybrid (ehv)
Owners Guide, 2nd Printing
USA
(fus)

Driver Controls

82

Advertising