Shifting between 2h (4x2) and 4h (4x4 high), Shifting to/from 4l (4x4 low), Using the n (neutral) position – FORD 2009 F-150 v.2 User Manual

Page 299: Driving

Advertising
background image

4H (4X4 High) – Used for extra traction such as in snow or icy roads or
in off-road situations. Not intended for use on dry pavement.

N (Neutral) – No power to either front or rear wheels.

4L (4X4 Low) – Uses extra gearing to provide maximum power to all
four wheels at reduced speeds. Intended only for off-road applications
such as deep sand, steep grades or pulling heavy objects. The shift lever
will not engage 4L (4X4 LOW) until the transmission is in N (neutral)
and the vehicle is moving below 3 mph (5 km/h); this is normal and
should be no reason for concern. Refer to Shifting to/from 4L (4X4
Low)
for proper operation.

Shifting between 2H (4X2) and 4H (4X4 high)
• Move the transfer case lever between 2H (4X2) and 4H (4X4 High) at

a stop or any forward speed.

Note: Momentarily releasing the accelerator pedal while preforming a
shift will improve engagement/disengagement times.

Note: Do not perform this operation if the rear wheels are slipping.

Note: Some noise may be heard as the system shifts or engages; this is
normal.

Shifting to/from 4L (4X4 Low)

1. Bring the vehicle to a speed of 3 mph (5 km/h) or less.

2. Place the transmission in N (Neutral).

3. Move the transfer case lever through N (Neutral) directly to the
desired position.
• If the transfer case will not engage into 4L (4X4 Low) do not force

the lever. Allow the vehicle to coast at a speed below 3 mph
(5 km/h), then repeat Steps 2 and 3.

Note: Some noise may be heard as the system shifts or engages; this is
normal.

Note: For proper operation in 4X4 Low, ensure the transfer case shift
lever is moved entirely rearward in to the 4L (4X4 Low) position and
that the 4x4 Low light is displayed in the message center.

Note: Ideal 4L (4X4 Low) shift conditions occur when the vehicle is
rolling at a speed below 3 mph (5 km/h) and the transmission is in N
(Neutral).

Using the N (Neutral) position

The transfer case N (Neutral) position overrides the transmission
and puts the vehicle in neutral regardless of transmission gearshift
lever position. The vehicle can move forward or backward.

2009 F-150 (f12)
Owners Guide, 2nd Printing
USA
(fus)

Driving

299

Advertising